Trend KWJ750P 750mm Pro Multi-Material Worktop Jig
SKU: 903948
Est. £99.99 - £99.99 + VATProduct Description
Features
FRONT EDGE SETTING All settings are done from the front edge eliminating any discrepancies from scribing or when using non-standard width worktops.
EASY SET REFERENCE WINDOW Fast set up for any backset, simply align to a measured line.
5 BACKSET OPTIONS (3, 5, 10, 24, 35mm) to meet the demands of new materials, edge profiles and trends.
FLUSH EDGE COMPATABILITY Allows worktops to be cut flush with door faces for handleless contemporary styles without additional measuring or marking up.
SINGLE PASS JOINT CUTTING ON NARROWER BACKSETS WITH THINNER WORKTOPS Minimises strain on the router and extends cutter life.
FAST JOINTING Cuts a full male and female joint in 15 minutes including setting up.
MULTIPLE WORKTOP MATERIAL COMPATABILITY Compact laminate, Composite, Solid Wood, Chipboard Laminate.
NO SET WORKTOP WIDTH RESTRICTION No need for alignment pins for worktop widths.
FRUSTRATION FREE SETUP Simple intuitive setup; measure, mark, clamp and cut.
OFFSET CAMS Unique backset wedges for consistent easy setting.
EDGE PROFILE COMPATABILITY Covers square edge, small radius, Postform radius and bullnose profiles.
CLAMP RECESSES For below the surface clamping for unrestricted routing with plunge saw clamps.
Specification
Length - 985 mm
Width - 335 mm
Thickness - 12 mm
Weight - 4.73 kg
End Cut - 45 degrees
Corner Radius - 40 mm
Corner Radius - 100mm
Corner Radius - 400 mm
Corner Mitre Joint - 45 degrees
Female cut material width loss (inset) - Variable
Standard Equipment
1x Trend KWJ750P 750mm Pro Multi-Material Worktop Jig
4x ABS Plastic pins
4x Cams (pairs)
Product Specification
Brand | Trend |
Model | KWJ750P |
Backset Options | 3, 5, 10, 24, 35mm |
Flush Edge Compatibility | Yes |
Single Pass Joint Cutting | Yes |
Fast Jointing | 15 minutes cut time |
Material Compatibility | Compact laminate, Composite, Solid Wood, Chipboard Laminate |
No Width Restriction | Yes |
Unique Backset Wedges | Yes |
Profile Compatibility | Square edge, Small radius, Postform radius, Bullnose |
Clamp Recesses | Yes |
Length | 985 mm |
Width | 335 mm |
Thickness | 12 mm |
Weight | 4.73 kg |
End Cut | 45 degrees |
Corner Radius Options | 40 mm, 100 mm, 400 mm |
Corner Mitre Joint | 45 degrees |
Inset | Variable |
Standard Equipment | 1x Trend KWJ750P Worktop Jig, 4x ABS Plastic pins, 4x Cams |