The External Air Admittance Valve, in robust grey PVCu, delivers superior fire performance and handles high water discharges. Compliant with BS EN 12380, it permits fresh air but no foul gases into sanitary pipework, operating from -20 to +60°C without insulation, optimizing airflow at 30.8L/s. Additionally, it eliminates the need for roof ventilation stacks, reducing installation time, and is backed by a 12-month warranty.

External Air Admittance Valve, Grey

This 0.16 litre, polished shock arrestor features a 1/2" connection, ideal for a single outlet use or a variety of bathroom uses. It protects your pipe fittings from damage due to water hammer vibrations and is best installed near the valve to minimize shock to the system. With its stainless steel construction, it is resistant to coastal conditions and brackish water, ensuring a long lifespan.

0.16 Litre Polished 1/2" Shock Arrestor

The 22mm 2 Port Zone Valve is ideal for regulating flow in residential or light commercial central heating systems. Notably, this valve incorporates end switches for electronic pump and boiler control, and is particularly beneficial for solid fuel systems due to the fail-safe function during power outages. A model for constantly open operation is also available.

2 Port Zone Valve 22mm

A compact, 2-port 22mm valve with a motorised system ideal for residential hot water or central heating circuits. Includes removable actuator, detachable cable, and a power-on indicator. Simple installation and operation thanks to its compact design and compression joint interfaces.

2 Port Valve 22mm

This 28mm three-port valve allows easy motor repair or exchange with its one-click, snap-on design. The motorised valve boasts a durable spring, manual lever, and a visible valve position indicator. It offers a working pressure capacity up to 0.7 bar and a tight 100% shut off. Compatible and easy to install with industry-standard wiring.

3 Port Mid Position Valve 28mm

The Solvent Weld Air Admittance Valve, compliant with BS EN 12380 standards, ensures efficient airflow of 43 L/s into your sanitary pipes, preventing odor release indoors. Excellent for use below appliance flood level and suitable in temperatures from -20°C to +60°C without insulation. Enhances your plumbing system's efficiency.

Solvent Weld Air Admittance Valve, Black

The A1 approved universal solvent weld air admittance valve offers secure jointing and efficient air entry into sanitary pipes while blocking odorous gases. Adapts below linked appliances' flood level and supports -20 to +60 degrees Celsius without insulation. With a 6.71 l/s air flow capacity, it includes a universal adapter suiting 32mm, 40mm, and 50mm pipes. Comes with 12-month guarantee.

Universal Solvent Weld Air Admittance Valve, White

The robust air admittance valve offers secure solvent weld jointing due to its modified PVCu build. It adheres to BS EN 12380 standards, operates between -20 and +60°C, and meets high fire performance. It enables free air entry into sanitary pipework, shielding buildings from unpleasant gases, and functions as a secondary rodding point. With a capacity of 43 L/s, it can be installed below appliance flood levels, and is backed by a 12-month warranty.

Push Fit Air Admittance Valve, White

This high-quality grey push fit air admittance valve aids in airing sanitary systems without releasing foul gases. It adheres to BS EN 12380 and A1 standards, performs well between -20 and +60 Celsius degrees & carries a max air flow of 43 L/s. No special insulation required and it functions as a rodding point for unclogging, making it versatile and durable.

Push Fit Air Admittance Valve, Grey

The 110mm Air Admittance Valve controls air entry and prevents gas escape in sanitary pipework. Made of high-quality, fire-resistant PVCu, it endures temperatures from -20°C to +60°C without insulation. It offers high airflow capacity (30.8 L/s), eliminates vent stack needs, and complies with BS EN 12380 standards for below-flood-level installation. Available in black, it provides reliable service with a 12-month warranty.

External Air Admittance Valve, Black, 110mm

The Air Admittance Valve, ideal for 82-110mm pipes, aids efficient sanitary waste management. Certified to BS EN 12380 and BBA-approved, it guarantees superior performance. The valve's plastic build wards off rust, ensuring durability. It allows air into discharge systems without releasing odours, and offers easy connections to soil pipe spigots. Various colours offer suitability for diverse aesthetics.

Air Admittance Valve, 82-110mm, White

The 15mm auto air vent with John Guest Fittings is a resilient solution for efficient air venting in heating systems, crafted from robust brass and heat-resistant polypropylene. It expertly mitigates air entrapment issues in sealed heating units, minimizing noise, corrosion, and maintenance costs. With its vacuum break, this vent prevents air locks, enables proficient expulsion of air while filling systems with water, and is suitable for heating systems and closed-circuit hot water systems.

15mm Auto Air Vent with John Guest Fittings

This robust, high-pressure 3/4-inch ball valve, featuring a brass float mechanism, offers dependable use, ideal for toilets in both domestic and commercial scenarios. Boasting a removable seat and a 1.5-inch tail thread, it facilitates easy maintenance and secure tap connector attachments. WRAS-approved for quality and safety, the valve also includes nylon backnuts and a quarter-inch seat bore.

High Pressure Ball Valve, 3/4in

A high-pressure, WRAS-compliant brass ball valve, designed for toilet applications. Operates via float mechanism, with a removable seat and tail fitted with a nylon seat and backnuts. Ideal size of 12mm caters to various plumbing needs. Boasts seat bore dimensions of 3/8in, and dimensions of 8.75 x 3.5 inches.

High Pressure Ball Valve, 12mm

This 28mm ball valve is equipped with a lever handle for simple operation. Built to the PN25 DZR standard and EN331 approved, it ensures high quality and reliability. Note that it is specifically designed for use with gas only. The valve's high standard compliance ensures its aptness for a wide range of applications.

28mm Ball Valve with Lever Handle, PN25 DZR, EN331 Approved, Gas Only

This is a quality-assured, WRAS approved 15mm ball valve with a unique Eres-style lever handle in red and blue. It features a full bore design for efficient fluid or gas flow regulation within pipe systems, offering a reliable solution to plumbing needs. Its easily identifiable handle ensures simple operation.

15mm Ball Valve with Eres Lever, Red & Blue Handle, Full Bore

This commercial 15mm ball valve with lever handle offers easy shut-off for building water applications without draining the entire system, aiding to isolate water flow. Available with blue or red handle options (signifying hot and cold usage), it's nickel-plated for durability. The valve complies with EN331 standards ensuring standout quality.

15mm Ball Valve with Commercial Lever, JG SF con RB Handle

This 1/2" Side Entry Ball Valve, designed with a robust brass shank, produces minimal water hammer, promising near-silent operation. Paired well with restricted access handles, it includes a snap release for easy maintenance. As a dependable plumbing component, it complies with UK standards.

Sign In

Building Materials

Timber & Sheet Materials

Joinery, Windows & Ironmongery

Garden, Fencing & Landscaping

Plumbing & Heating

Electrical

Painting, Decorating & Tiling

Fixings, Screws & Adhesives

Tools, Accessories & Workwear

Brassware & Valves

Filters