Fire Alarm Systems

For use with 3000, 2110e, 160e and 140e Series alarms (and 260RC Series Carbon Monoxide alarms when using the Ei128COV cover).

Ei128RBU Hard Wired Relay Module With Battery Back Up

This mains powered accessory increases the flexibility and user friendliness of the alarms by allowing the user to remotely Test, Locate and Silence alarms in the system:

 	Test – The alarm system
 	Locate – The alarm that has been activated
 	Silence– Any nuisance alarms

This model of Control Switch is hard wired into the system, but there are wireless versions available.

Ei1529RC Hard Wired Alarm Control Switch

The Ei450 is used to control all the alarms in a system from one place.

Ei450 RadioLINK Alarm Controller

ESP Assistance Alarm Kit

ESP Red Fire Isolation Switch

The MCP401RC Manual Call Point is an emergency device that triggers all the alarms on the connected system when activated.

MCP401RC Hard Wired Manual Call Point

The Ei407 Manual Call Point is an emergency device that when activated triggers all the alarms on the connected system.

Ei407 RadioLINK Manual Call Point

The Ei168RC RadioLINK Base is an easi-fit mounting plate with built-in RadioLINK technology. It provides wireless interconnect between alarms, i.e. when one alarm is triggered, all alarms in the system sound.

Ei168RC RadioLINK Base

This Relay Module triggers external devices if the alarms on the system are activated, such as a strobe light or telecare device

Ei128R Hard Wired Relay Module

Using the ASD Multipoint detector with sounder and/or strobe as part of the TWINFLEXpro 2-wire fire alarm system means that when a detector is wired in, so is an optional sounder, with no extra wiring required. This greatly reduces the number of points that need to be installed – and the time it takes to install! In fact, with the TWINFLEXpro exclusive 2-wire design, installation savings can be as high as 40%. Multipoint offers 7 different modes of detection, which means one device can suit multiple applications. Whatever type of detection is required, it can be selected with an easy flick of a switch at the time of commissioning.

Sounders can be run on the same pair of wires as detectors and/or call points
No extra devices needed for audible warning
Can differentiate between call point, smoke and heat alarms
Two sound volumes easily selectable by dil switch

Using patented, advanced optical scatter sensor design and sophisticated electronic technology, Fike delivers reliable smoke and/or heat detection significantly reducing the risk of nuisance fire alarms.

Fike Twinflex Multipoint ASD Detector with Sounder – 204-0001

The Fike 505-0002 Twinflex Pro² 2 Zone bi-wire fire alarm panel is an adaptable, cost-effective two-wire fire alarm system.

Devices are connected to this panel via Twinflex data protocol communication. Using highly intelligent systems, this panel can differentiate between smoke detectors, heat detectors and manual call point alarms.

When purchasing your Fike bi-wire panel, it is important to note that up to 32 devices can be connected per circuit and these panels can be sold in 2,4 and 8 zone versions.

Known in the industry for its state-of-the-art technology, the Twinflex Pro is designed for ease of use and reliability. Among other key features, the versatility of this fire alarm panel is unmatched.

This panel uses the famous Fike ASD multipoint detection system meaning this whole system can be installed using only one pair of wires per zone.

A Fike fire alarm panel is able to monitor each zone for device faults, end of line faults, short circuit faults and detector head removal. Panel storage allows for 500 event logs to be stored along with day/night modes and 72-hour battery standby times.

Sign In

Building Materials

Joinery, Windows & Ironmongery

Fixings, Screws & Adhesives

Electrical

Garden, Fencing & Landscaping

Painting, Decorating & Tiling

Plumbing & Heating

Timber & Sheet Materials

Tools, Accessories & Workwear

Fire Alarm Systems

Products

Filters